The power is automatically turned off (to stand-by mode), in about 30 seconds of
idle use on the camera or after the last setting is made. To save the battery
energy, you can select the display-off setting from the custom setting. In this case,
the display screen turns off in about 8 seconds of idle use.
While MF18 is in the stand-by mode, display screen turns off and the pilot lamp
blinks every 2 seconds showing the flash unit is in stand-by mode.
To turn on MF18 again, press the camera’s shutter button halfway or press any
button of the flash unit.
In case the MF18 is not in use over 30 minutes, the unit is completely turned off. To
turn on MF18 again, take the first step of turning the flash unit on.
The mode and the value set on the flash unit before turning off is memorized and
returns in the same condition when switched on again.
1.
2.
MF 18 has energy saving double power off function.
The modelling LED lamps with light ratio control, makes it easy to focus on the
shooting subject. The brightness reflects flash power ratio setting of side A and B;
therefore, the desired effect can be previewed.
To switch on the modeling LED lamps, press
for 2 seconds.
The LED lamps switch off temporarily when the
flash fires, then switch on again for the next
shoot. The icon ( ) is indicated on the screen.
1.
2.
To switch off the modeling LED lamps,
press for 2 seconds.
3.
Set
Set
Basic Operation
Modelling LED lamps function
10
