EV
A:B 1:2.8
The TTL flash exposure compensation value 0.0Ev is shown as a
default setting.
TTL flash exposure compensation is provided in 19 steps by 0.3 Ev
increment from -3.0
・・・
0
・・・
to +3.0 Ev.
Select the EV compensation value you desire.
To set the power ratio of side A (left) and B (right), select the
ratio.
The power level ratio can be selected from 15 different
combinations with 0.5 Ev steps, A:B = 1:--- (flash off) – 8:1 – 5.6:1
– 4:1 – 2.8:1 – 2:1 – 1.4:1 – 1:1 – 1:1.4 – 1:2 – 1:2.8 – 1:4 – 1:5.6 –
1:8
– --- (flash off):1.
To switch on the modeling LED, press for 2 seconds until
the modeling LED icon ( ) is on. The icon switches off
temporarily when the flash fires or press the button for 2
seconds to switch off.
The power level ratio of modeling LED can
be selected from 15 different combinations.
To keep this value on your flash, press on / off switch to lock.
(Press it again to release the lock)
Take a picture and the aimed subject is shown with required
lighting effect by keeping the exposure level of background as
originally expected.
On some cameras, the TTL flash exposure compensation can be
set on the camera.
When the flash exposure compensation is set on the flash unit, this
value is to be counted in addition to the compensation value you
set on the camera.
The display screen of the flash unit however shows the exposure
compensation value set on the flash unit only.
Set
Set
EV
A:B 1:2.8
A:B 1:2.8
Setting Mode and Function
14
