NISIS Qp2 Digital Camera Installation Guide Rev 1.9
I am running Windows 98 Second
Edition (SE), on A PC with an AMD
processor with a VIA Technologies
USB controller, and am experiencing
problems when connecting my Qp1
(or Qp2) Camera. Can you help ?
This problem may be corrected if you download and run the patch on the
Microsoft web site at :-
patch1
I am running Windows 98 with my
Qp1 (or Qp2) Camera connected to
my PC, but I cannot see the Camera
listed in Device Manager. Why ?
This problem can occur if the camera was disabled in Device Manager
before you removed it. When you reconnect it, Device Manager does not
refresh the information it is displaying.
The solution is to click "Refresh" in Device Manager.
Where can I download the latest
version of Microsoft's NetMeeting
application ?
You can download it from the Microsoft Web site at :-
Microsoft's
NetMeeting Web page
I am having problems installing the
software programs that came with the
Qp1 (or Qp2) Digital Camera. Have
you any suggestions, please?
Before you start installing any new drivers or application programs, it is
strongly recommended that you close all application programs, before
attempting to install the new application program.
To see what applications are currently running, hold down the "Ctrl" and
"Alt" keys on the left of your Keyboard, then press down once only, the
"Delete" key.
For Windows 95, 98, and ME, you should see a list of programs that are
running in the background.
For Windows 2000, you will see a Windows Security window; click on
the Task Manager button.
Some of these programs are necessary for Windows but most others are
background tasks such as mouse drivers, virus checkers and other
communication programs, which can be temp orarily shut down while
you install new application programs. For more information on this
subject click
here
.
You will need to make the decision on which tasks can be temporally
shut down. Most applications listed will be recognised by the name of
the background task. For example, "Touchmgr" shows that the Keyboard
Touch Manager is running. This can be temporally shut down. ONLY
shut down applications you recognise as not being necessary for
Windows.
The programs you temporarily shut down will restart when you next
restart your PC.
Don't forget that each time you restart your PC, background tasks are
enabled again. So if you are installing several programs, which require
you to reboot your PC after each installation, you will need to
temporarily end each background task after every restart until you have
completed all the installations.
The Qp1 (or Qp2) Digital Camera
Manager does not let me create my
own Album folders. Can you help,
please?
Please download the latest version of the Qp1 (or Qp2) Drivers, together
with the latest manuals. Then uninstall your existing Digital Camera
Manager, and install the new Drivers, carefully following the
instructions in the new installation manual.
These latest Drivers enable you to create your own Album folders.
I have a NISIS Qp2 Camera and when
I clear the pictures for the Lr (Low
Resolution Mode), it resets to 99. Al
the literature says it should be 107
pictures for Lr. Is there a problem?
No there is no problem. The LCD display can only display two digits.
Therefore, the highest number it can display is 99.
If you start to take pictures in Lr mode, the counter does not change from
99 for the first 8 pictures. From then on, it counts down in the normal
way.
