NISIS Qp2 Digital Camera Installation Guide Rev 1.9
At the end of the installation, Windows will ask you to restart your PC.
Restart your PC.
You have now completed the installation of the Qp2 Digital Camera drivers.
Before you install the optional programs on your Installation CD, you should check that the Digital Camera
Manager has installed successfully. Follow the instructions in the Users Guide, for uploading still photographs
from your camera to your PC. Then follow the instructions on how to view and record live video.
The function of the Digital Camera Manager is to enable you to upload still photographs from your camera to
your PC, and to display and record live video. Once you have uploaded your still photographs or recorded your
video clips, you can use the other programs on the installation CD to manipulate the photographs or video clips
you have already uploaded to your PC using the Digital Camera Manager.
Installing the batteries into the Qp2 Digital Camera
Slide down and off, the battery cover on the back of the Camera.
Take care to insert the 2 batteries the correct way round, using the diagram inside the battery compartment in the
camera as a guide.
Replace the battery cover.
Assembling the Camera stand
Connect the Stand Camera Holder to the Stand Base.
For your convenience, place the Qp2 Camera in the Stand Camera Holder whenever you connect the camera to
your PC. While the camera is connected to your PC it draws it’s power through the USB cable to save on battery
life.
Connecting the Qp2 Digital Camera to your PC
Ensure you have loaded the Qp2 Digital Camera Drivers
BEFORE
you connect your Digital Camera to your
PC.
Hold the camera so the front of the camera is facing you (the front side has the NISIS logo), then turn the smaller
of the two connectors on the USB cable until the metal flat side is facing you. The cable connector should now
fit the camera USB connector.
Please take care not to force the connectors. You could damage the connector if too much force is applied.
Because the Digital Camera is a USB device, you do not need to switch your PC off before physically
connecting it to your PC USB socket.
After you have plugged the USB cable into the side of the camera, you can plug the other end of the USB cable
into a free USB port which should be located at the back of your PC.
Installation of Application Software.
Don't forget that each time you restart your PC, background tasks are enabled again. So if you are installing
several programs, which require you to reboot your PC after each installation, you will need to temporarily end
each background task after every restart until you have completed all the installations.
Insert the Installation CD into your CD ROM Drive. The CD should automatically show the Installation screen.
If the CD does not autostart, then you can start the “Setup.exe” program manually by clicking on the Windows
“Start” button, select the “Run…” option, click on the “Browse…” button, and locate your CD ROM Drive
(usually drive “D”), and select the “Setup.exe” program, click on the “Open” button, and finally click on the
“OK” button.
Select the first application you wish to install, and follow the instructions on the screen.
