11
0800 862 0453
HOW TO STORE
1
Store the Ninja
®
Kitchen System Pulse
®
upright with
the 1L bowl on the motor base, 4-Blade assembly
inside and lid on the bowl. Secure the power cord
underneath the base by wrapping the cord around the
cord wrap. Do not place anything on top. Store the
Nutri Ninja
™
cups and the rest of the attachments along
side the appliance where they will not be damaged and
won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Kitchen System Pulse
®
features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will stop. To
reset the appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 30
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION:
Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT
immerse the motor base into water
or any other liquid.
1
Separate/remove all parts from each other.
2
Clean the motor base and gear shaft with a damp cloth
and wipe dry.
3
Place the bowl and Nutri Ninja
™
cups in the dishwasher.
Place the lids and attachments on the top rack. Use
caution when handling the blade assemblies as the
blades are very sharp.
NOTE:
You may also wash the containers by filling the
container with no more than 700 ml of warm water
and a drop of dish washing detergent, placing the
corresponding lid on the container and pulsing a few
times. Do not fill the container with more than 700 ml
of water because it will overflow. Once clean, remove
the container from the motor base. Rinse the container,
attachment and lid under running water. Allow all the
parts to dry before storing.
Care & Maintenance
