v) Then connect the DC connectors to Solis-2.5K-2G (as shown in Figure 4.9).
Figure 4.9 Connect the DC Connectors to the Inverter
4. Connect Solis-2.5K-2G to the AC grid switch.
Each Solis-2.5K-2G is supplied with an AC grid terminal connector, which is shown in Figure 4.10.
!
WARNING:
Figure 4.10 AC Grid Terminal Connector
Figure 4.11 AC Grid Terminal Connector Inside
The steps to assemble the AC grid terminal connectors are listed as follows:
a) Attach the wires to the grid terminal using screws on the connector (as shown in
Figure 4.12).
b) Put the terminal cap on the terminal (as shown in Figure 4.13).
Figure 4.12 Connect Wires to the Grid Terminal
Figure 4.13 Put the Cap on the Terminal
c) Connect the AC grid terminal connector to Solis-2.5K-2G (as shown in Figure 4.14).
Figure 4.14 Connect the Terminal Connector to Solis-2.5K-2G
5. Connect Solis-2.5K-2G to your PC via communication terminal (optional).
Please refer to the software application manual.
.13.
.14.
4. Installation
4. Installation
There are symbols marked inside the connector ( see Figure
4.11), the Line wire of grid must be connected to
“
L
”
terminal; the Neutral wire
of grid must be connected to
“
N
”
terminal; the Earth of grid must be connected
to
“
”
(see Figure 4.12).
