6.3 Settings
The following submenus are displayed when the Settings menu is selected:
1.Set Time
2.Set Address
3.Clear Energy
4.Restore Settings
6.3.1 Setting Time
This function allows time and date setting. When this function is selected, the LCD will
display a screen as shown in Figure 6.3.
NEXT=<ENT> OK=<ESC>
01-01-2010 16:37
Figure 6.3 Set Time
Press the UP/DOWN keys to set time and date. Press the ENTER key to move from one
digit to the next (from left to right). Press the ESC key to save the settings and return to
the previous menu.
6.3.2 Setting Address
YES=<ENT> NO=<ESC>
Set Address: 02
Figure 6.4 Set Address
Press the UP/DOWN keys to set the address. Press the ENTER key to save the settings.
Press the ESC key to cancel the change and return to the previous menu.
6.3.3 Clearing Energy
This function is used to clear energy (total energy, this month energy and last month energy).
When Clear Energy is selected, the screen will show the following figure (Figure 6.5).
Are you sure?
YES=<ENT> NO=<ESC>
Figure 6.5 Clear Energy
Press the ENTER key to confirm before executing clearing energy. Press the ESC key to
cancel the change and return to the previous menu.
6.3.4 Restoring Settings
.19.
.20.
6. Operation
6. Operation
Do NOT use this function. The inverter is preset to standard AS4777, which must NOT be
changed. Access to this function may cause damage to the inverter and may void the
warranty.
This function is used to set the address of an inverter connected to PC for communication
purpose. The address number can be assigned from
“
01
”
to
“
99
”
(see Figure 6.4).
The default address number of Solis-2.5K-2G is
“
01
”
.
