background image

The Cascade

 

Limited Warranty extends to the original purchaser of the system.  This warranty covers all parts and

factory labor needed to repair any Manufacturer-supplied item that proves to be defective in material, workmanship

or factory preparation.  The Warranty applies for the first full calender year from date of purchase.  These defective

items are subject to the following exclusions: membranes, filters, O-rings, and all other parts or components that

require regular replacement as a result of ordinary usage.

Disclaimers  

This Warranty applies only if the system is installed and used in compliance with the instructions

enclosed with the system.

The Warranty does not cover any non-standard Cascade parts.  This Warranty does not cover the costs of repairs

or adjustments to the unit that may be needed due to use of improper parts, equipment or materials.  This Warranty

does not cover repairs required due to use of non-standard Cascade parts, unauthorized alterations of the unit,

or failure of a unit caused by such alterations or by unauthorized repairs.

The Warranty does not cover malfunctions of the unit due to tampering, misuse, alteration, lack of regular

maintenance, or misapplication.  In addition, damage to the unit due to fire, accident, negligence, act of God, or

events beyond the control of the Manufacturer are not covered by this warranty.

Incidental and Consequential Damages  

The Manufacturer does not assume responsibility for payment of

incidental and consequential damages as a result of the failure of this unit to comply with express or implied

warranties, such as lost time, inconvenience, damage to personal property, loss of revenue, commercial losses,

postage, travel, telephone expenditures, or other losses of this nature.  Some states do not allow the exclusion or

limitation of incidental or consequential damages, so this exclusion may not apply to you.

Owner’s Warranty Responsibilities  

Under the provisions of the Warranty, the owner is expected to perform

scheduled maintenance, as described in this Manual.  Neglect, improper maintenance, abuse, or unapproved

modifications may invalidate the Warranty.  Should your unit develop a defect or otherwise fail to perform in

accordance with this Warranty, you should contact the dealer from whom the product was originally purchased.

Implied Warranties

 The implied at-law Warranties of merchantability and fitness for a particular purpose shall

terminate on the date one year after the date of purchase.  Note: some states do not allow limitations on how long

an implied warranty lasts, so the above limitations may not apply to you.

Other Rights 

This Warranty gives you specific legal rights and you may also have other rights which vary from state

to state.

OWNER'S MANUAL

System Warranty

C

E

OWNER'S MANUAL

System Specifications

C

D

System Capability

2000 gpd

Sediment Filter

25 micron

Carbon Block Filters (2)       5 micron

Manifold dimensions

12.5"W x 15"H x 4.5"D

Manifold weight (dry)

6.25 lbs.

Feed water

Potable water

Minimum feed pressure

40 psi

Maximum feed pressure

100 psi

Minimum feed temp.

32°F

Maximum feed temp

120°F

This system has been designed for installation by a licensed professional such as a contractor or plumber.

Proper completion of this installation will require basic familiarity with standard sink plumbing and proper use

of common hand and power tools.  Improperly installed systems could result in water damage due to leaks or

flooding.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate

disinfection before or after the system.

2

Summary of Contents for Cascade NS-14












Reviews: