Nilox 16NXRW1430001, User Manual

Page: 20 / 82

19
WAN S
ERVICE
Choose Advanced Setup > WAN Service , and the following page appears.
In this page, you are allowed to add, remove, or edit a WAN service.
WAN S
ERVICE
(PPP
O
E)
This section describes the steps for adding the PPPoE WAN service.

Step0 Choose Advanced Setup > Layer2 Interface > ATM Interface . In this page, you can add or remove to
configure DSL ATM Interfaces. Click Add to add ATM Interface and the following page appears. DSL Link Type: EoA
(it is for PPPoE, IPoE, and Bridge) and select the encapsulation mode to be LLC/SNAP-Bridging (according
to the uplink equipment). Click Apply/Save to save the configuration, and return the following page.

Step1 Choose Advanced Setup > WAN Service , and the following page appears. Click Add. In the Wide Area
Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper
ATM interface for this WAN service).