Nilox 16NXRW1430001 User Manual Download Page 12

Page: 12 / 82

This page displays the device information such as the board ID, software version, and the information of your WAN
connection such as the upstream rate and the LAN address.

Choose

Device Info > WAN

and the following page appears.

This page displays the information of the WAN interface, such as the connection status, and the IP address.

TATISTICS

Choose

Device Info > STATISTICS > LAN

and the following page appears.

In this page, you can view the statistical information about the received and transmitted data packets of the Ethernet and

wireless interfaces.

Click

Reset Statistics

to restore the values to zero and recount them.

Choose

Device Info > STATISTICS > WAN Service

and the following page appears.

In this page, you can view the statistical information about the received and transmitted data packets of the WAN interface.
Click

Reset Statistics

to restore the values to zero and recount them.

Summary of Contents for 16NXRW1430001



















































































Search results

Summary of Contents for 16NXRW1430001

Reviews:

Related manuals for 16NXRW1430001

Brands by name

Popular brands

Nilox 16NXRW1430001, User Manual

Search results

Summary of Contents for 16NXRW1430001

Reviews:

Related manuals for 16NXRW1430001

Brands by name

Popular brands