Nilox 16NX071900001 User Manual Download Page 55

Page: 55 / 66

16NX071900001

Cable/DSL Router User Guide

so please back up the router’s current settings before you upgrade its firmware.

3) Do not turn off the router or press the Reset button while the firmware is being

upgraded.

4) The router will reboot after the upgrading has been finished.

4.10.3 Factory Defaults

Choose menu “

System Tools

→

Factory Defaults

”, you can restore the configurations of

the Router to factory defaults on the screen (shown in Figure 4-51).

Figure 4-51

Click the

Restore

button to reset all configuration settings to their default values.

)

Note:

1) The

default

User Name

is admin.

2) The

default

Password

is admin.

3) The

default

IP Address

is 192.168.1.1.

4) The

default

Subnet Mask

is 255.255.255.0.

5) All settings you have saved will be lost when the default settings are restored.

4.10.4 Backup and Restore

Choose menu “

System Tools

→

Backup and Restore

”, you can save the current

configuration of the Router as a backup file and restore the configuration via a backup
file(shown in Figure 4-52).

Figure 4-52

To back up the Router’s current settings:

Step 1:

Click the

Backup

button (shown in Figure 4-52), click

Save

button in the next

screen (shown in Figure 4-53) to proceed.

Summary of Contents for 16NX071900001



































































Search results

Summary of Contents for 16NX071900001

Reviews:

Related manuals for 16NX071900001

Brands by name

Popular brands

Nilox 16NX071900001, User Manual

Search results

Summary of Contents for 16NX071900001

Reviews:

Related manuals for 16NX071900001

Brands by name

Popular brands