6
TRUCK BOOSTER
Original Instructions
Machine protection
The machine features an over-
current protection and built-in
thermal protection of the motor.
In the event of increased power
consumption (maloperation)
2 Description
2.1 Application
This high-pressure hot water
washer has been developed
for stationary installation and
professional use within:
- light industry
- transport
- building and construction
- service
Section 4 describes how to use
the high-pressure hot water
washer.
Only use the high-pressure
hot water washer for purposes
described in this manual.
The safety precautions must be
observed to prevent damage
to the machine, the surface to
be cleaned or severe personal
injuries.
2.2 Operation elements
See foldout at the end of these
operating instructions.
1 High-pressure outlet (quick
coupling, male)
2 Main switch
3 Stop push button (red)
4 Start push button (green)
5 Heating ON/OFF push
button
6 Pressure gauge
7 Water inlet
8 Thermostat (temperature
adjustment)
9 Button for addition of
detergents
10 Inspection window (hour
counters, error messages)
11 Holder for spray lance
12 Dosing of detergent
13 Data plate
14 Lifting device
15 Holder for spray lance -
frost protection, external
(option, not standard)
and in the event of excessive
motor temperature (obstructed
ventilation etc.), the entire
machine will automatically be
disconnected from the mains
supply.
Short circuit protection
The machine is equipped with
a short-circuit protection. In the
event of short-circuits in the
machine, the protective device
will disconnect the entire ma-
chine from the mains supply.
