16
TRUCK BOOSTER
Original Instructions
3
4
OK
ESC
+
MITS
UBIS
HI
DC
INP
UT
(A)
(B)
+
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
If the motor of the TRUCK
BOOSTER does not start or
stops unintendedly with the red
“STOP” push button (4) fl ash-
ing, an error is present. Read
the error message through the
“Inspection window” and refer to
section “
7 Troubleshooting
”.
4.2.2 Operation - automatic
start/stop
Always hold the
spray lance with
both hands!
The TRUCK BOOSTER is
automatically started when the
trigger (1) of the spray handle is
activated and will automatically
stop and enter standby mode
when the trigger is released.
When the machine is not in
use, the trigger should be
locked with locking device.
4.2.3 Running with hot water
The TRUCK BOOSTER is
equipped with a diesel unit to
heat the water.
The diesel unit can be switched
on or off at convenience by
pushing the white “Heating”
push button (5). Pushing the
button once will turn on the light
in the button and switch ON the
diesel unit.
Pushing the button again will
turn out the light in the button
and switch OFF the diesel unit.
The temperature can be
adjusted within the limits stated
on the “Thermostat” (8), by
turning the button to the desired
value. When the diesel unit is
ON (push button (5) alight),
the control unit of the TRUCK
BOOSTER will monitor the
water temperature and regulate
the diesel unit to provide the
preset temperature.
If an error occurs to the heating
system of the TRUCK BOOST-
ER, the machine stops and the
red “STOP” push button (4) will
start fl ashing and the diesel
unit will be shut off. The TRUCK
BOOSTER will continue to
be functional with non heated
water by pushing the green
“START” push button (3).
In this case please refer to sec-
tion “
7 Troubleshooting
”.
1
