22
POSEIDON PE/DE
Original Instructions
depends on the water
temperature. Max. suction
height (see section 8.3
Technical Data) is reached with
cold water (up to 8°C). With
70°C/60°C warm water, the
ma chine must be under or at
the water level.
4.2.3 Start POSEIDON PE
+ oil light indicators will turn
on.
2. Move the throttle lever to
SLOW or RUN position.
3. Push the start button until
the machine starts. Now the
ch oil light indicators
will turn off. If not, stop the
machine immediately and
contact Nilfi sk-ALTO service
department.
4. The machine can be started
by means of the starter rope
if the battery has gone fl at.
See manual from Yanmar.
4.3 Using
detergents
Detergent can be added by
means of the detergent injector.
1. Dilute detergent according
to the manufacturer's
instructions.
2. Set the pressure to the
lowest setting on the lance.
CAUTION!
Never allow
detergent to dry
on the surface to be cleaned
as this may cause damage.
1. Switch on the ignition by
pushing the ON/OFF button
of the machine. The charging
If the water being suctioned
contains particles, a suction
fi lter must be mounted on the
end of the hose.
In case of risk of running sands,
a sand fi lter must be attached.
Summary of Contents for POSEIDON 2-31 PE
Page 1: ...106169229 c Operating instructions POSEIDON PE DE...
Page 16: ......
