10
NEPTUNE SB
1)
Options / model variants
Original instructions
3.11 Antifreeze - before first
use
The machine is fl ushed with anti-
freeze at the factory to protect it
against freezin; this mixture (ap-
prox. 5 l) may be captured in a
suitable container for reuse.
3.10 Electrical
connection
CAUTION!
230 V / 400 V ?
(220 V / 440 V ?)
Before connecting devices with
voltage changeover1): Check that
the pre-selected voltage on the
machine corresponds with the
voltage of the electrical instal-
lation. Otherwise the electrical
devices of the machine can be
destroyed.
CAUTION!
When using a cord reel:
1. Release brake of the cord
reel.
2. Unwind the cord completely.
CAUTION!
The cleaner should only be con-
nected to a correctly installed
electrical supply.
1. Observe safety instructions in
chapter 1.
2. Insert the plug into the electri-
cal socket.
400V
400V
230V
230V
400V
400V
230
V
230
V
3.9
Connecting the water
supply
1. Attach quick connect adapter
found with Owners Manual to
the water supply hose.
2. Rinse the water supply hose
briefl y in order to prevent sand
an other dirt particles entering
into the machine.
3. Attach water supply hose with
adapter to inlet quick connec-
tor.
4. Open water supply faucet.
NOTE!
See Technical Data for required
quantity of water and water pres-
sure.
In the case of poor water quality
(sand, etc.), it is recommended
that an inlet water fi lter be in-
stalled.
Water supply hose should be
a reinforced hose and have a
minimum inside diameter of
3/4"
(19 mm).
