background image

4

UNO / DUO BOOSTER BASIC

  

Original Instructions

1  Safety Precautions and Warnings

For your own safety

The high-pressure washer 
may only be used by persons 
instructed in its use and who 
have been expressly authorised 
to do so.

Although extremely easy to 
operate, children should not be 
allowed to use the washer.

Warning

Inhalation of aerosols can be 
hazardous to health.
Where applicable use a device 
in order to avoid or reduce 
aerosols production, e.g., a 
shield covering the nozzle.
For protection against aerosols 
use a respiratory mark of class 
FFP 2 or higher.

General

When using the high pressure 
washer all existing national 
regulations must be observed. 
Beyond the instruction manual 
and the current national legal 
regulations for prevention of 
accidents, also the approved 
rules for safe working must be 
observed.

Any method of use endangering 
the safety of persons or 
equipment is forbidden.

Before use

Before starting up your high 
pressure washer check that it is 
in a regular condition. Electric 
plugs and couplings must be 
watertight.

Check the electric cables at 
regular intervals for damage 
and wear. Only use the high 
pressure washer if the electric 
cable is all right 

(damaged 

electric cables can cause 
electric shock!)

Important instructions

Connection to public mains 
according to the applicable 
regulations in your country.

IMPORTANT: 

Only use water 

without impurities! 

Before each use of your high 
pressure washer check the 
most important visual parts.

High pressure jets can be 
dangerous if misused. Never 
direct the water jet towards 

people, pets, electric wiring, or 
the machine itself.

Spray handle and lance are 
affected by a thrust during 
operation - therefore always 
hold the spray lance firmly with 
both hands.

Never try to clean clothes or 
footwear on yourself or other 
persons.

Operator and anyone in 
immediate vicinity of the site 
of cleaning should take action 
to protect himself from being 
struck by debris dislodged 
during operation.

Check that cleaning will not 
result in dangerous substances 
(e.g. asbestos, oil) being 
washed off the object to be 
cleaned and harming the 
environment.

Do not clean sensitive surfaces 
made of rubber, fabrics or 
the like with the zero nozzle. 
With the flat jet nozzle keep a 
distance of at least 15 cm to the 
surface to be cleaned.

Symbols used to mark 
instructions

Before using the 
high-pressure 
washer, be sure to 
also read the en-
closed operating 
instructions and 

keep them within reach at all 
times.

Safety instructions 
in these operating 
instructions which 
must be observed 

to prevent risks to persons are 
marked with this danger sym-
bol.

This symbol is 
used to mark sa-
fety instructions 
that must be ob-
served to prevent 
damage to the 
machine and its 

performance.

This indicates tips 
and instructions to 
simplify work and 

to ensure safe operation.

Summary of Contents for Duo Booster
































Reviews: