Nilfisk-ALTO Duo Booster, Operating Instructions Manual

Page: 18 / 31

18
UNO / DUO BOOSTER BASIC
Original Instructions
5 Fields of Application and
Working Methods
5.2 Working pressure
5.1 Fields of application The most important fields of
application for this product are:
Agriculture Cleaning of machinery, agricultural implements, stalls,
equipment and buildings.
Transport Cleaning of trucks, buses, cars etc.
Building & Cleaning of vehicles, equipment, buildings etc.
Construction
Light industry Degreasing and cleaning of machines, workpieces, and
vehicles.
Service Cleaning of vehicles, public baths, institutions etc.
The high pressure system
may be used with high or low
pressure at your own option:
Low pressure Is first and foremost used for the application of detergents
and for rinsing.
High pressure Is used during the actual cleaning.
Intermediate As an example it may be used for the cleaning of surfaces
pressure which cannnot stand a too powerful jet, i.e. soft surfaces.
5.3 Detergents As standard the system is
delivered without a detergent
injector.
If you want to use detergents
or disinfectants these should
be dosed through an external
injector (see section 4.1.5) or
internally through the pump
(see section 4.1.6).
The most efficient cleaning
is reached with detergents
in conjunction with the high
pressure cleaning. For that
purpose Nilfisk-ALTO can
offer you a series of products
specially developed for high
pressure cleaning, among other
fields within:
• Cleaning of vehicles,
machines, stalls etc.
• Disinfection
• Degreasing of workpieces
• Descaling
The products are water-based,
without phosphates, and the
applied tensides (surface active
substances) comply with the
present requirements for easy
biodegradability.
Contact your Nilfisk-ALTO
distributor for directions as to
which product(s) will fulfil your
requirements.
The method of application and
the dosage of the individual
products appear from the
product labels or the data
sheet.
Low-foaming detergents are
applied through an injector and
under low pressure. A change
to cleaning under high pressure
is effected by regulating from
»low pressure mode« to »high
pressure mode« on the double
spray lance or by attaching a
high pressure spray lance.