USER MANUAL
ENGLISH
SR 1300H B
146 1062 000(3)2007-02 A
23
SIDE BROOM REPLACEMENT
NOTE
Brooms with harder or softer bristles are available.
This procedure is applicable to all types of brooms.
WARNING!
It is advisable to wear protective gloves when
replacing the side broom because there can be
sharp debris between the bristles.
Drive the machine on a level ground and engage the
parking brake with the pedal (84) and the lever (76).
Turn the ignition key (68) to "0".
Lift the side broom which has to be removed, with the lever
(71) or (72).
Inside the side broom, loosen the screw (A, Fig. 11)
and then remove the side broom with the hub (B) by
disengaging it from the shaft (C).
Recover the key (D) and the washer (E).
At the workbench, remove the two screws (F, Fig. 11) and
separate the broom (H) from the hub (G).
Install the new side broom (H, Fig. 11) onto the hub (G),
and tighten the screws (F).
Install the key (D), then install the new side broom with
the hub (B, Fig. 11). Install the washer (E) and tighten the
screw (A).
Check and adjust the side broom height as shown in the
previous paragraph.
1.
2.
3.
4.
5.
6.
7.
8.
S311424
Figure 11
