FORM NO. 56041444 / SELECTSCRUB KA-27, KA-33, KA-39 - 6
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Once the machine is completely unpacked, install the batteries and battery terminals as illustrated on the “BATTERY WIRING DIAGRAM” located inside the machine
just above the battery box.
Next, install the brush covers. Be sure to install the brush covers so that the latch is in the front of the machine (Figure 1).
SET UP
FIGURE 1
WARNING!
DO NOT USE THIS MACHINE WITHOUT THE BRUSH COVERS INSTALLED! DAMAGE MAY RESULT IF THE BRUSHES OR PAD HOLDERS ARE ALLOWED
TO HIT OTHER OBJECTS.
Next, attach the squeegee to the squeegee bar using the two knobs supplied with the squeegee (Figure 2). The squeegee has been factory adjusted, so it does not
need initial adjusting.
The machine is now ready for the brushes to be installed and prepared for scrubbing.
FIGURE 2
