Nilfisk-Advance MC 2C Series Instruction Manual Download Page 5

5

Original Instructions

  

• 

Wear goggles, ear protection and protective clothes 

during operation.

  

Transporting the  high pressure washer

• 

When transporting the machine in or on a vehicle, it 

must be secured, e.g. with straps, so that it cannot 

slip or tip over.

• 

Nilfisk recommends that the machine is positioned 

horizontally on the backside, when transported in or 

on a vehicle.

  

Detergents

• This machine has been designed for use with clean-

ing agents supplied or recommended by Nilfisk. The 

use of other cleaning agents or chemicals may ad-

versely affect the function of the machine.

 

 

Before starting the work

Inspecting the machine

• Do not use the machine if a supply cord or important 

parts of the machine are damaged, e.g., safety de

-

vice, high pressure hose, and spray handle and spray 

attachments.

• The trigger of the spray handle must move easily and 

automatically return to its starting position when re-

leased.

• Always keep high pressure hose and spray attach-

ment in good condition (clean, moving easily) and cor

-

rectly assembled.

   

Electrical connection

 WARNING! 

Minimize the risk for electrical shock:

• Voltage and frequency of the machine (see rating 

plate) must match the voltage of and  frequency of the 

mains supply.

• Only connect the machine to electrical installa-

tion made by a certified electrician and com ply with 

IEC 60364-1.

Summary of Contents for MC 2C Series
























Reviews: