16
Original Instructions
7 After using your pressure washer
7.2 Winding up of electric
cable and high pressure
hose
up carefully.
1. Wind up the electric cable on
the dedicated hooks. Built-in
clip for good holding.
The lower hook can be
turned to release the electric
cable.
2.. The high pressure washer
comes in two models: A) with
hook for storage of high pres-
sure hose (13) – B) with a
hose reel (12.).
7.1 Storing the washer
The machine should be
stored in a frost-free room!
Pump, hose and accessories
should always be emptied of
water prior to storing as follows:
1. Stop the machine (turn the
start/stop switch (1) to posi
-
tion “
O
” and detach water
hose and accessory.
2.. Restart the machine and
activate the trigger. Let the
machine run until no more
water runs through the spray
handle.
3. Stop the machine and un-
plug. Wind the electric cable
round the hooks placed on
the side of the machine.
4. Separate spray handle and
spray lance.
5.
Machines without hose
reel:
Detach high pressure
hose, coil it up and place it
on the hose storage.
Machines with hose reel:
Coil the high pressure hose
up on the hose reel.
6. Place spray handle, nozzles
and other accessories in the
holders of the machine.
Should the machine by mistake
be frozen, let it thaw and check
it for damage.
NEVER START-UP A FROZEN
MACHINE
.
Frost damages are not
covered by the guarantee!
7.3 Storage of accessories
The standard accessories
(spray handle, spray lance
(A) and nozzle cleaning tool)
can be stored on the pressure
washer.
To avoid accidents, the electric
cable and the high pressure
hose should always be wound
