for
Kent by Nilfisk-Advance
Propane Powered Burnishers
∗
Allow only qualified and trained personnel to operate equipment.
∗
Follow closely maintenance and operating instructions.
∗
Keep accurate records of maintenance and service in provided log book.
∗
Remember, routine maintenance
NOW
will prevent a breakdown
LATER.
∗
Always check oil level before starting.
∗
Keep nuts and bolts tightened and hose connections snug.
∗
Refer to engine manufacturer's service manual or contact Nilfisk-Advance for engine repairs or
adjustments not listed in this manual.
∗
Never alter or reconstruct the fuel system. To do so may be dangerous and will void the factory
warranty.
∗
Always use U.L., C.T.C./D.O.T listed safety fill cylinders supplied by Nilfisk-Advance.
∗
Be careful not to cross thread the Rego gas line coupling at the fuel cylinder.
∗
Always store the fuel cylinder
outside
away from heat and direct sunlight.
∗
Never leave the machine running unattended.
∗
Always operate in a well ventilated area. (Catalytic mufflers need to warm up before they are
effective).
∗
Check pad holder for cracks each time the pad is changed.
∗
Have the machine serviced by a certified technician, including an emission check, every three
(3) months.
∗
Before attempting any service on the machine, turn the ignition switch "OFF" and remove the
key to avoid accidental start-up.
WARNING:
Keep hands and feet clear of rotating pad!
WARNING:
Failure to follow the instructions and warnings appearing in this operating manual or
on machine labels may result in serious injury to the person using the machine and possibly to
other persons and property
NOTE: This machine is manufactured for commercial use only.
Safe Operating Practices
