IV. SCHEDULED MAINTENANCE
Following proper scheduled maintenance procedures will provide years of uninterrupted service.
4
KAWASAKI ENGINE
REGULAR SERVICE PERIOD
(Performed At Indicated Hour Intervals)
ITEM or TYPE of SERVICE
Break In
Each
25 hrs.
50 hrs. 100 hrs. 300 hrs.
8 hrs.
Use
Engine Oil
Check Level
2
Change
2,4,5
2,4,5
Oil Filter
Change
4,5
Engine Dust Filter
Inspect
1
Clean/Change
1,2
Carburetor Air Cleaner
Inspect
2
Clean/Change Element
2,4,5
Clean Pre-Foam Element
2
Belt
Inspect
2
2
Adjust/Replace
As Required (5 below)
Fuel Hose & Connections
Inspect
2
2
Replace
If Signs of Wear are Present (3,5 below)
Cooling Fins
Clean
2
Burnishing Head Assembly
Inspect
6
Pad Holder
Inspect
When Changing Pads
Replace
If Cracks Appear (2 below)
Bolts & Connections
Inspect
6
Tighten
6
Spark Plug
Clean/Replace
5,6
4,5
Battery & Battery Cables
Inspect
2
Exhaust Emissions
Check
3,5
Check & Adjust Valve Clearance
5,6,7
Retorque Heads
1. Perform after each hour of operation.
2. Refer to Section V “GENERAL MAINTENANCE PROCEDURES”.
3. These items should be serviced by an authorized Kent Service Center.
4. Refer to Engine Manufacturer’s “OWNER’S MANUAL” for recommended replacement.
5. Always enter maintenance performed in “SERVICE LOG BOOK”.
6. Routine maintenance.
7. Refer to Engine Service Manual.