Recovery System
73
Service Manual – Condor
™
EcoFlex
™
, BR 1100/1300 EcoFlex
™
5 Disconnect the
Tank Tether
from the back of
the operator seat
Caution: Maintain a good grip on the
recovery tank and control
the tank as you lower it. Do
not allow the tank to fall to
the floor on its own.
6
Carefully lower the tank to the floor level.
7
Note that the tank is attached to the chassis
by two pins. Lift up on the tank ends to
separate and pull the tank free from the
machine
Caution: Be careful not to crush or damage the drain hose when pulling the tank from the
chassis.
8
To reinstall the tank:
a
Align each side of the tank bracket with the chassis pins one at a time.
b
Grip the opening of the tank cover at the rear and quickly lift up to set (engage) the tank in its
upright position
c Reconnect the
Tank Tether
to the back of the operator seat.
d
Swing the tank up to the vertical position to reengage the
Tank Latch
e
Reconnect the vacuum motor wiring connector and squeegee hose.
Vacuum Motor
1
Drain the recovery tank.
2 Release the
Tank Latch
and tilt the tank to the
rear
Tank
Tether
Tank
Latch
