USER MANUAL
8
909 6754 000(2)2006-10 A
Recovery water tank (17)
- It contains the recovery water collected by the squeegee and vacuumed.
Recovery water tank cover (18)
- It hermetically closes the recovery water tank.
Can holder (19)
- Compartment to store a can or small objects.
Document retainer (optional) (20)
- Elastic retainer for documents.
Squeegee (21)
- It collects the solution after scrubbing.
Squeegee mounting handwheels (22)
- They fasten the squeegee to the machine.
Squeegee balance adjusting handwheel (23)
- To adjust the squeegee blade position.
Solution filter (24)
- It filters the solution before supplying it to the brush.
Solution tap (25)
- It stops the solution flow when the filter is cleaned.
Recovery water tank cover (open)
(26a) Opened to be cleaned.
(26b) Completely opened.
By turning the retaining plate (28), it can be removed.
Tank cover gasket (27)
- The gasket must be integral for an efficient vacuuming of the recovery water.
Cover retaining plates (28) and (29)
- Turn the retaining plate (28) to remove the tank cover.
Compensation hole (30)
- Keep it clean, for an efficient vacuuming of the recovery water.
Serial number plate/technical data/conformity certification (31)
- It contains the machine data.
Plug for squeegee vacuum hose cleaning (32)
- Remove it to clean the vacuum hose.
Vacuum grid with automatic shut-off float (33)
- Keep it clean, to avoid a stuck in the vacuum system.
Solution front filler neck (34)
- For easily filling the tank with solution.
Foam filter (35)
- It prevents debris or foreign materials from entering into the tank.
Recovery water tank (open) (36)
- Empty and lift it to reach the components below.
Machine straight forward movement adjusting handwheel (37)
- Turn it clockwise or counter-clockwise for machine straight
forward movement.
Machine forward speed adjustment handwheel (38)
- Turn it clockwise or counter-clockwise to change the machine forward
speed.
Solenoid valve (39)
- It controls the solution flow.
CONTROL AND SWITCH DESCRIPTION
Brush/pad-holder switch (51)
- It turns the brush/pad-holder on and off.
Vacuum system switch (52)
- It turns the vacuum system on and off.
Hour counter (optional) (53)
- It shows the machine working hours.
Solution flow control switches (54)
- To control the detergent quantity supplied to the brush/pad.
Flow increase switch (54a)
- It increases the solution quantity.
Flow decrease switch (54b)
- It decreases the solution quantity.
Solution flow indicator (54c)
- It shows the solution quantity supplied to the brushes.
