USER MANUAL
909 6754 000(2)2006-10 A
7
CONTROL PANEL
51.
Brush/pad-holder switch
52.
Vacuum system switch
53.
Hour counter (optional)
54.
Solution flow control switches
54a. Flow increase switch
54b. Flow decrease switch
54c. Solution flow indicator
S311302
MACHINE STRUCTURE - DESCRIPTION
Control panel (1)
- It is the area where machine controls are located, see Control and Switch Description paragraph.
Handlebar (2)
- Grasp it and use it to manoeuvre the machine.
Power supply cable (3)
- Connect it to the electrical mains for machine operation.
Power supply cable holder (4)
- Use it to roll up the power supply cable when it is not in use. Fasten the cable safely.
Solution rear filler neck (5)
- Open it to pour solution in the tank. Use only low-foam detergents.
Water removable filler hose (optional) (6)
- For easily filling the tank with water.
Squeegee lifting/lowering lever (7)
- To lift or lower the squeegee.
Deck lifting/lowering pedal (8)
- It has the following functions:
(8a) Pedal position when deck is lifted
(8b) Pedal position when deck is lowered
Rear steering wheel (9)
- It allows the machine to steer.
Front wheels on fixed axle (10)
- They bear the machine weight.
Squeegee vacuum hose (11)
- It conveys the recovery water from the squeegee to the recovery water tank. To easily clean it,
remove the plug (32).
Recovery water drain hose (12)
- It drains the recovery water from the tank.
Solution drain and level check hose (13)
- It is equipped with level marks to check the solution level in the tank. Disconnect
the upper end to drain the tank.
Brush/pad-holder deck (14)
- On the deck, brush or pad-holder and the relevant motors are installed.
Brush/pad-holder (15)
- The machine can be equipped with one brush or one pad-holder with pad.
Solution tank (16)
- It contains the solution.
54
53
52
51
54a
54c
54b
