![Nilfisk-Advance CA 430 S Use And Maintenance Manual Download Page 32](http://html.mh-extra.com/html/nilfisk-advance/ca-430-s/ca-430-s_use-and-maintenance-manual_1693530032.webp)
USE AND MAINTENANCE MANUAL
6
08812944(2)2004-05 A
DIAGRAMS
Wiring diagrams, for different optional equipments (see
Fig. H).
Key
EV1
Solenoid valve
FR
Machine frame
H1
Ground screw
M1
Brush motor
M2
Aspirator motor
PL
Plug
SW1
Brush switch
SW2
Aspirator switch
Colour codes
BK
Black
BU
Blue
BN
Brown
GN
Green
GY
Grey
OG
Orange
PK
Pink
RD
Red
VT
Violet
WH
White
YE
Yellow
ACCESSORIES/OPTIONS
In addiction to the standard components, the machine can
be equipped with the following accessories/options,
according to the machine specific use:
1.
Brush of materials different from the standard ones.
2.
Pads of different materials.
3.
Squeegee oil-proof rubbers.
For further information concerning the optional
accessories apply to an authorized retailer.
USE
By means of this Manual, the operator must learn the
meaning of these symbols.
Do not cover these plates for any reason, and in case of
damage replace them immediately.
BEFORE START-UP
Brush or pad-holder installation
1.
Lift the brush-holder (14 or 15, Fig. G) using the pedal
(20, Fig. C).
2.
Position the brush (18, Fig. G), or the pad-holder with
the pad (19 and 20) under the brush-holder.
3.
Lower the brush-holder (14 or 15, Fig. G) using the
pedal (20, Fig. C).
4.
Press the brush push-button for a few seconds (5,
Fig. B) to hook the brush/pad-holder.
Squeegee installation
5.
Install the squeegee into place (10, Fig. C) and fix it
with the knobs (11), then connect the hose (25) to the
squeegee.
6.
Adjust using the knob (12, Fig. C) the squeegee so
that its rear rubber (14, Fig. C) - in all its length -
touches the floor and that the front rubber (13) is
slightly detached from the floor.
WARNING!
On some points of the machine there are
some adhesive plates indicating:
– DANGER
– WARNING
– CAUTION
– CONSULTATION
NOTE
Depending on the type of floor, either a
brush (18, Fig. G) or a pad-holder (19) with
pad (20) can be installed on the machine.
To simplify, the following instructions refer
to the brush only.
Summary of Contents for CA 430 S
