Nilfisk-Advance CA 430 S, Use And Maintenance Manual

Page: 29 / 52

USE AND MAINTENANCE MANUAL
08812944(2)2004-05 A 3
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential
damages to people and machine are shown below.
– Disengage the supply plug from the electric socket
before performing any maintenance/repair operation.
– This machine must be used by qualified and
authorized personnel only. Children or disabled
people cannot use this machine.
– Do not wear jewels when working near electrical
components.
– Do not work under the lifted machine if it is not
securely fixed.
– Do not operate the machine near dangerous,
inflammable and/or explosive powders, liquids or
vapours.
– Carefully read all maintenance/repair instructions
before carrying out any maintenance/repair
procedure.
– Take all necessary precautions to prevent hair,
jewels and loose dresses from being caught by the
machine moving and vacuum parts.
– Do not leave the machine unattended without being
sure that the machine cannot move independently.
– Do not use the machine on surfaces with a gradient
greater than the one indicated on the machine.
– Do not wash the machine with pressurized water, or
with corrosive substances.
– Do not use the machine in too dusty areas.
– While using this machine take care not to cause
damage to people.
– Do not put any can containing liquids on the machine.
– Storage temperature must be within 0°C and +40°C.
– The machine working temperature must be within
0°C and +40°C.
– Humidity range should be within 30% and 95%.
– Always protect the machine against the sun, rain and
bad weather, both under operation and inactivity
condition.
– Do not use the machine as a transport vehicle.
– Do not allow the brush to operate while the machine
is stationary to avoid damaging the floor.
– In case of fire, use a powder extinguisher. Do not use
water.
– Do not bump into shelves or scaffoldings, in particular
where there is a risk of falling objects.
– Do not tamper with the machine safety guards; follow
the routine maintenance instructions scrupulously.
– Do not remove or modify the plates affixed on the
machine.
– In case of machine malfunctions ensure that these
are not caused by a lack of maintenance. Otherwise,
request assistance from the authorized personnel or
the Service Centre.
– If parts must be replaced, require ORIGINAL spare
parts from a Dealer or Authorized Retailer.
– To ensure the machine proper operation and safety
conditions, the authorized personnel or the Service
Centre must carry out the Scheduled Maintenance
detailed in the related chapter of this Manual.
– The machine must be disposed of properly, because
of the presence of toxic-harmful materials (plastic
parts, etc.), which are subject to standards that
require disposal in special centres (see the Scrapping
chapter).
– If the machine is used according to the instructions,
the vibrations do not cause dangerous situations. The
machine vibration level is under 2.5 m/s
2
.
– Do not leave any object penetrate in the openings. Do
not use the machine in case the openings are
blocked; always keep the openings free from dust,
bast, hairs and any other foreign body which could
reduce the air flow.
– This machine cannot be used on roads or public
streets.
– Pay attention to the machine transfers when
temperature is under freezing point. The water in the
recovery tank or in the pipes could freeze and
damage the machine.
– Use the brushes and the pads supplied with the
machine and those specified in the Instruction
Manuals. Using other brushes and pads could reduce
safety.
UNPACKING
To unpack the Machine carefully follow the instructions on
the packing.
When the machine is delivered, check that the packing
and the machine were not damaged during transportation.
If the damage is evident, keep the packing and have it
checked by the Parcel Service that delivered it. Call the
Parcel Service immediately to fill in a request for a
compensation for damages.
Please check that the following items have been supplied
with the machine:
–
Scrubber-dryer Use and Maintenance Manual
– Spare Part List
DANGER!
WARNING!