MANUALE DI ASSISTENZA
ITALIANO
BR 601 / BR 651 / BR 751 / BR 751 C
909 6424 000(3)2007-12
65
IMPIANTO DI TRAZIONE
SMONTAGGIO/MONTAGGIO DEL MOTORE DELL'IMPIANTO DI TRAZIONE E RELATIVI CUSCINETTI
E GUARNIZIONI (Macchine dopo gennaio 2007)
Smontaggio
Portare la macchina nella zona di smaltimento designata, quindi svuotare il serbatoio dell'acqua di recupero (58) con il tubo
(22).
Svuotare il serbatoio dell'acqua di lavaggio (59) con il rubinetto (36).
Posizionare la macchina su una pedana di sollevamento (se disponibile).
Altrimenti, portare la macchina su un pavimento pianeggiante.
Portare la chiave di avviamento (12) su "0".
Rimuovere la testata portaspazzole/portafeltro (16), oppure la testata portaspazzole a rullo (17) (vedere procedura al
paragrafo specifico).
Sterzare completamente la ruota anteriore (AG) verso sinistra.
Applicare degli idonei cunei alle ruote posteriori destra e sinistra (43), in modo che la macchina non possa muoversi
autonomamente quando la ruota anteriore frenante (AG) viene sollevata.
Con l'aiuto di un secondo operatore, sollevare leggermente la parte anteriore della macchina e applicare sotto alle staffe (AH)
del telaio due idonei spessori in legno (AI) di altezza tale da tenere sollevata la ruota anteriore (AG) di circa 3 cm (1,18 in) dal
pavimento.
Sollevare il gruppo serbatoi (60) e scollegare il connettore (63) delle batterie.
Rimuovere la fascetta di ritegno (A) del cablaggio elettrico.
Tagliare le fascette di ritegno (B) del connettore (C).
Scollegare il connettore (C) del freno elettromagnetico.
Rimuovere le viti (D), quindi rimuovere il coperchio (E).
Scollegare i collegamenti elettrici (F).
F
D
E
C
A
B
B
S301643
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.