Nilfisk-Advance 56110000, Service Manual

Page: 65 / 102

FORM NO. 56043124 - Condor XL
™
- 65
CONTROL LOCKS
LIGHTS
BACK-UP AL ARM
RECOVERY SYSTEM
VAC UUM OFF DELAY
SQUEEGEE UP DELAY
ENGINE IDLE DELAY
EXTENDED SCRUB SYSTEM
USE AN YTIME, USE CLEAN FIRST
10 SECOND S (10-30 SEC, INCREMENT=1 SEC)
15 SECOND S (5-30 SEC, INCREMENT= 1 SEC)
START UP STAT E
OFF, ON , LAST STATE
OPERAT ING MODE
SOLUTION IN REVERSE
OFF , ON
20 SECOND S (10-250 SEC, INCREMENT = 1 SEC)
UNLOCK , DETER GENT , DETERGENT & SOLUTION
NORMAL , AL WAYS O N
OFF, REVERSE , FORWARD & REVERSE
SIDE SCRUB SYSTEM
START UP STAT E
OFF, ON , LAST STATE
SIDE SWEEP SYSTEM
BROOM START UP
OFF, ON , LAST STATE
DUST GUARD START UP
OFF, ON , LAST STATE
TIM EOUT MOD E
NORMAL , IN NEUTRA L
SOLUTION_IN_REVERSE_FLG: 0 = OFF (false) , 1 = ON (true)
SQUEEGEE_OFF_DELAY: 50-300, default = 150
VACUUM_OFF_DELAY: 100-300, default = 100
RECOVERY_TIMEOUT_MODE: 0 = normal , 1 = in neutral
CONTROL_LOCK: 0 = unlock , 1 = detergent mix only, 2 = detergent mix and solution flow
Only appears when SIDE_SCRUB_INSTALLED_FLG = 1 (from configuration menu)
SIDE_SCRUB_START_MODE: 0 = off, 1 = on, 2 = last state
Only appears when SIDE_SWEEP_INSTALLED_FLG = 1 (from configuration menu)
SIDE_SWEEP_START_MODE: 0 = off, 1 = on, 2 = last state
SIDE_MIST_START_MODE: 0 = off, 1 = on, 2 = last state
Only appears when RECYCLE_INSTALLED_FLG = 1 (from configuration menu)
RECYCLE_START_MODE: 0 = off, 1 = on, 2 = last state
RECYCLE_OP_MODE: 0 = use anytime, 1 = use clean first
IDLE_TIME_OUT: 100-2500, default = 200
Only appears when BACKUP_ALARM_INSTALLED_FLG = 1 (from configuration menu)
BACKUP_ALARM_OP_MODE: 0 = off, 1= reverse only , 2 = forward and reverse
LIGHTS_OP_MODE: 0 = normal , 1= always on
Entered by pressing and holding SCRUB OFF and SCRUB ON buttons during
3 second power on sequence.
USER OPTIONS MENU (continued)