Nilfisk-Advance 56110000, Service Manual

Page: 6 / 102

6 - FORM NO. 56043124 - Condor XL
™
JACKING THE MACHINE
CAUTION!
Never work under a machine without safety stands or blocks to support the machine.
When jacking the machine, do so at designated locations. See Tie Down/Jacking Locations
(C) in Figure 2 .
TRANSPORTING THE MACHINE
CAUTION!
Before transporting the machine on an open truck or trailer, make sure that:

All access doors are latched securely.

The machine is tied down securely. See Tie Down/Jacking Locations (C) in Figure 2 .

The machine Parking Brake (28) is set.
TOWING OR PUSHING A DISABLED MACHINE
CAUTION!
The machine’s drive propelling pump is manufactured with an adjustable tow valve. This valve prevents damage to the hydraulic
system when the machine is being towed/pushed short distances without the use of the engine.
See Figure 3. The tow valve is controlled by the Tow Valve Lever (34) which is accessed by opening and propping up the Engine Cover (3) . Pull
the Tow Valve Lever out to disengage the hydrostatic lock between the motor and pump.
The hydrostatic pump can be damaged if the machine is towed with the valve in the normal working position (Tow Valve Lever pushed IN). Note: If
the tow valve is left in free-wheeling position (Tow Valve Lever pulled OUT) the hydrostatic pump can’t drive the machine FWD or REV. No damage
will result, just reset the valve to the normal working position by pushing the lever IN. Tow or push the machine no faster than a normal walking pace
(2-3 miles per hour) and for short distances only. If the machine is to be moved long distances, the front drive wheel needs to be raised off the
fl oor
and placed on a suitable transport dolly.
FIGURE 2