background image

Figure 8. 

Wall-mount placement 

         

      Use sheetrock screws

Figure 9. 

Vertical alignment of  

 

     antenna is necessary  

 

     for optimal reception

The final design feature in System Configuration #3 uses a Niles Radio Frequency Gateway (RFG) 
to extend the antenna away from the HT-MSU. The Niles iC2 HT-MSU comes with an RF antenna 
that can be connected directly to the HT-MSU antenna socket. Reception range is approximately 75 
feet (22.86 meters). We recommend using the 10 foot antenna extension cable to position the RF 
antenna away from the home theater sources. Use the extension cable and the antenna bracket to 
get the antenna up and away from all of the products that can cause interference with RF reception. 
Keep in mind that the reception range may not be enough if all of the home theater gear is located in 
another room further away than 75 feet (22.86 meters). A Niles RFG is an optional device that can be 
used to move the RF radio antenna up to 330 feet (100 meters) away from the HT-MSU. The RFG is 
connected to the HT-MSU via CAT-5 cable. (Please refer to the Installation Section for the importance 
of terminating CAT-5 cable with the T568A standard). Niles QuickConfig Software will ask if a Niles 
RFG is being used to aid in set-up.

INSTALLATION CONSIDERATIONS

PLACEMENT OF THE HT-MSU

Niles recommends placing the HT-MSU conveniently close to the equipment it is controlling. 
Generally, the unit should be placed in a concealed location because its indicator and connections 
are only used during installation. Placement possibilities include:

1) Wall-mount (affixed to the back of the equipment cabinet or a nearby wall) (

Figure 8

)

2) Rack-mount (attached to the back of a professional 19-inch standard equipment rack that 
uses traditional 1, 2 or 3 “u” hole spacing (e.g. Middle Atlantic)
3) Table-top (on the floor or shelf behind the equipment)

ANTENNA CONSIDERATIONS

Communication between the iC2 Remote and the HT-MSU is an RF-based with a frequency of 2.4 
GHz. Effective range of the iC2 Remote to HT-MSU communication is 75 feet (22.86 meters) open 
air. The RF antenna can be attached directly to the HT-MSU with the provision that the antenna is 
vertical for best reception. 

14

Summary of Contents for iC2

































Reviews: