NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
27
SPECIFICATIONS
HT-MSU
Power Requirements:
12VDC 1.25A Regulated
In-line Power Supply (included)
Unit Dimensions:
10.52”L x 5.85”W x 1.01H
(26.72 cm x 14.86 cm x 2.57 cm)
RF Section:
2.4-GHz frequency ZigBee wireless
mesh technology
Signal Range:
75 to 100 feet open air
(22.86 to 30.48 meters)
Wiring Requirements:
RG59 CL Antenna Cable
(included), CAT-5 cable, 3 conductor 22-gauge
cable, and 2 conductor 22-gauge cable
Trigger Output Voltage:
Three assignable
outputs at 12VDC 150mA
Contact Closures:
Three assignable Normally
Open/Normally Closed contact closures rated to
handle 12V @ 5 Amps each
IR Ports:
8 Routed IR Flasher Ports and 1
Routable Global IR Output Port
RS232 Ports:
8 Routed RS232 Output Ports
IR & RS232 Code Memory:
4000 commands
depending on brand type and model of source
Sequence capability:
450 thirty-two step
sequences
Sequence Delays:
.1 to 20.0 seconds per step
Component Synchs:
8 Power Status Synch
ports rated to sense 12V 150mA input signals
or video voltage
IR Bandwidth:
Compatible with virtually all
brands of remotes using carrier frequencies
between 26 and 105KHz
IC2 REMOTE
Power Requirements:
12VDC 1.25A Regulated
In-line Power Supply (Included)
Battery:
Rechargeable L-ION 3.75 volts 3500
amp/hours
Full Charging Cycles to 80% battery
effectiveness:
550
Unit Dimensions:
7.45”L x 5.22”W x 2.96”H
(18.92 cm x 13.26 cm x 7.51 cm)
RF Section:
2.4-GHz frequency ZigBee wireless
mesh technology
Signal Range:
75 to 100 ft open air
(22.86 to 30.48 meters)
GENERAL
iC2 System Shipping Weight:
Approximately 7 lbs.
(3.18 kg)
Warranty:
Two-year limited
Agency Certifications:
Tested to UL/EN60065
for US, Canadian and EU markets.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation. FCC and CE approved.