D
O O R B E L L
I
N T E R F A C E
10
D
O O R B E L L
I
N T E R F A C E
11
INSTALLATION SETTINGS
Contact Closure Triggers
- Contact closure trigger inputs provide for two independent
chime triggers. When triggered, the selectable trigger tone, assigned delay and chime are
executed.
3V-30V Voltage Triggers
- Voltage trigger inputs provide for two independent chime trig-
gers. When triggered, the selectable trigger tone, assigned delay and chime are executed.
Note: Voltage triggers are not polarity dependent.
Chime and Audio Level Adjustments
- Adjustable output level for the selected chime
and the connected paging system.
Note
: The Audio Level Adjustment does not affect an audio input signal that is being
recorded for a Custom Chime. The Custom Chime record level must be adjusted exter-
nal at the audio source.
Important
: Lowering the chime and audio level will prevent sound distortion.
Setting the Tone/Delay
- Four DIP switches provide a selectable trigger tone and various
delays between when a chime is triggered and when the chime is actually generated.
Turning switch 1 ON enables a trigger tone that activates the audio sensing of the Paging
Input of a Niles MultiZone System. Switches 2, 3 and 4 ON enable delay times. The delay
time provided for each switch is indicated in the table below.
Delay times are summed together when multiple switches are
selected (e.g. 2 and 3 = 3 seconds). There is no delay included
if none of these DIP switches are selected.
Notes
:
1
. The chime contact and voltage triggers are ignored
during a chime.
2
. A triggered chime is delayed 8 seconds after
the completion of a chime when a trigger tone or any amount of
delay is selected.
Switch
All OFF
2 ON
3 ON
4 ON
Delay
No Delay
1 second
2 second
4 second
INSTALLATION SETTINGS (Continued)
Recommended Tone/Delay Settings
Identifying the Version of a Niles MultiZone System
The ZR-4630 and ZR-8630AV will display their version on the front panel LCD display
when first powered on. The A4.6Ci contains the version letter in its serial number locat-
ed on the bottom panel.
Niles MultiZone System
Niles ZR-4630
Niles ZR-4630
Niles ZR-8630AV
Niles A4.6Ci
Version
Ver. 1.00 ~ 1.11
Ver. 1.12 ~ 1.16
Ver. 1.00 ~ 2.00
Ver. A ~ B
Recommended Setting
Tone On with seven seconds of
delay (switches 1, 2, 3 and 4 ON)
Tone On with three seconds of
delay (switches 1, 2, 3 ON)
Tone On with three seconds of
delay (switches 1, 2, 3 ON)
Tone On with four seconds of
delay (switches 1 and 4 ON)
