nilco 3290003, Instructions For Use Manual

Page: 13 / 18

13
4.2 Accessory
– Equipment
Model IC 371 IC 621 IC 622 IC 622 Air
Wave® IC CRAFTER
Accessories -
standard
equipment
- 27 cm wet/dry
change nozzles
for hard floors
and carpets
- crevice nozzle
- furniture brush
- upholstery
nozzle
- 40 cm wet/dry
change nozzles
for hard floors
and carpets
- crevice nozzle
- furniture brush
- 40 cm wet/dry
change nozzles
for hard floors
and carpets
- crevice nozzle
- furniture brush
- 40 cm wet/dry change
nozzles for hard floors
and carpets
- crevice nozzle
- furniture brush
- semi-automatical filter
shaker
- 240 V socket at the advice
with automatic switch-on
- 40 cm wet/dry change noz-
zles for hard floors and car-
pets
- crevice nozzle
- furniture brush
4.3 Daily Maintenance
1. Check cable and plug for signs of damage.
2. Carry out a function check on the float unit. Ensure that the float unit runs smoothly and fits tightly on the un-
derside of the motor casing.
3. After use, rinse the tank with clear water to prevent bacteria forming.
4. Check the switches of the machine and ensure that the plastic hoods do not show any signs of cracks or dam-
age.
5. Clean the textile filter.
4.4 Weekly Maintenance
1. Check hose, tubes and nozzles for signs of damage and eliminate any possible blockages.
2. Check the textile filter and/or cartridge filter for any damage. Clean or replace the filter(s).
After 500 working hours, a maintenance service is recommended at a
Fakir
/
nilco
Service Centre or direct with
the
Fakir
/
nilco
Reinigungsmaschinen GmbH, Service Centre.