nilan CTS602 HMI Software Instructions Download Page 12

Page: 12 / 40

Show data

It is possible to read off current data for the unit.

Show data

↳

Operating state

Description:

Shows the operating setting in which the unit is
running.

↳

T1 Outdoor air

Description:

Shows the outdoor temperature before reaching the
pre-heating element.

↳

T2 Supply air

Description:

Shows the supply air temperature. If an after-heating
element has been installed, T7 will be shown instead.

↳

T5 Condenser

Description:

Shows the condenser temperature.

↳

T6 Evaporator

Description:

Shows the evaporator temperature.

↳

T7 Supply air

Description:

Shows the supply air temperature if an after-heating
element has been installed. Otherwise T2 will be
shown.

↳

T10 Extract air/Room

Description:

Shows the current room temperature as measured in
the extract air.

↳

Air humidity

Description:

Shows the current air humidity in the dwelling.

↳

CO2

Description:

Shows the current CO

level in the dwelling (only if

installed).

↳

Supply air fan

Description:

Shows the level at which the supply air fan is
operating.

↳

Extract air fan

Description:

Shows the level at which the extract air fan is
operating.

↳

Unit information

Description:

Press "Unit information" for more information.

↳

Unit type

Description:

Shows the name of the product the software has been
set to work with.

↳

Software version

Description:

Shows the installed software version.

↳

Panel software

Description:

Shows installed software version on the panel.

Date/Time

It is important to set date and time correctly. It makes it easier to localise errors indicated in an error

report. When logging data, it is important to be able to follow the history. The time is shown under

“Date / Time” in the display.

Date / Time

↳

Year

Description:

Select "Year" in the panel and then select the correct
year.

↳

Month

Description:

Select "Month" in the panel and then select the correct
month.

↳

Day

Description:

Select "Day" in the panel and then select the correct
day.

↳

Hour

Description:

Select "Hour" in the panel and then select the correct
hour.

↳

Minute

Description:

Select "Minute" in the panel and then select the correct
amount of minutes.

Summary of Contents for CTS602 HMI









































Search results

Summary of Contents for CTS602 HMI

Reviews:

Related manuals for CTS602 HMI

Brands by name

Popular brands

nilan CTS602 HMI, Software Instructions

Search results

Summary of Contents for CTS602 HMI

Reviews:

Related manuals for CTS602 HMI

Brands by name

Popular brands