Nikon SB-5000 Reference Manual Download Page 168

Page: 168 / 200

H-3

Tips on Speedlight Care and Reference Information

En-01

Problem

Cause

Solution

The SB-5000
does not work
properly.

Microcomputer may have
malfunctioned if this occurs
even when fresh batteries are
properly installed.

• Remove the batteries

and insert them again,
keeping the SB-5000’s
power switch set to a
position other than [OFF].

• If the problem continues,

contact your retailer or
Nikon-authorized service
representative.

B-16

Nonstandard
display

Dials or buttons
do not operate.

Key lock is activated.

Cancel key lock.

B-10

The SB-5000
does not
operate.

Thermal cut-out is active.

Wait until the SB-5000 cools
down.

E-29

Warning indicators

Warning indicator

Cause

Solution

All operations have stopped
due to low battery power.

Replace the batteries.

B-17

The flash function is
canceled, and all operations
except power ON/OFF and
menu settings have been
suspended because the
SB-5000 has overheated and
could become damaged.

• Allow the SB-5000 to

cool down, keeping
the SB-5000’s power
switch set to a
position other than
[OFF].

• If the cooling system

is canceled, activate
it in the setup menu.

B-24
E-29

Summary of Contents for SB-5000









































































































































































































Search results

Summary of Contents for SB-5000

Reviews:

Related manuals for SB-5000

Brands by name

Popular brands

Nikon SB-5000, Reference Manual

Search results

Summary of Contents for SB-5000

Reviews:

Related manuals for SB-5000

Brands by name

Popular brands