A-21
Preparation
A
En-01
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there
is no guarantee that interference
will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into
an outlet on a circuit different
from that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
Nikon Inc.,
1300 Walt Whitman Road, Melville,
New York 11747-3064, U.S.A.
Tel.: 631-547-4200
Notices for Customers in Europe
Declaration of Conformity
Nikon SB-5000
Manufacturer: Nikon Corporation
A copy of the original DoC for our
products as it relates to R&TTE can
be found at the following website:
http://imaging.nikon.com/support/
pdf/DoC_SB-5000.pdf
R&TTE Directive
This product conforms to the
regulations governing radio-
frequency devices in the following
countries and can not be used in
other jurisdictions. Nikon accepts
no responsibility for the use of
this device in countries other than
those listed below.
AT BE BG CY CZ DK EE FI
FR DE GR HU IE IT LV LT
LU MT NL PL PT RO SK SI
ES SE GB IS LI NO CH TR
HR
Notice for Customers in Nigeria
Connection and use of this
communications equipment
is permitted by the Nigerian
Communications Commission
Notice for Customers in Jamaica
This product contains a Type
Approved Module by Jamaica: SMA
– “Type1EK”.
