Nikon SB-5000 Reference Manual Download

Page: 169 / 200

H-4

Tips on Speedlight Care and Reference Information

En-01

Warning indicator

Cause

Solution

All functions other than the
power switch are inoperable
because of power
abnormalities.

Turn off the power,
remove the batteries,
and contact your
retailer or Nikon-
authorized service
representative.

―

The flash-ready
indicator flashes
slowly after firing.

Underexposure may have
occurred.

Use a wider aperture
or move the flash unit
closer to the subject
and reshoot.

C-4

C-10
C-14
C-17

D-45

The remote flash
unit emits 8 long
beeps.

Underexposure may have
occurred.

Use a wider aperture,
move the flash unit
closer to the subject
or change the position
of the flash unit and
reshoot.

D-47

Pairing has failed.

Check the channel and
link mode setting and
try again.

D-12

The SB-5000 is attached to a
camera not compatible with
radio control.

Choose wireless
multiple flash-unit
photography using
optical control.

D-5

Summary of Contents for SB-5000









































































































































































































Search results

Summary of Contents for SB-5000

Reviews:

Related manuals for SB-5000

Brands by name

Popular brands

Nikon SB-5000, Reference Manual

Search results

Summary of Contents for SB-5000

Reviews:

Related manuals for SB-5000

Brands by name

Popular brands