Nikon N1929 User Manual Download Page 918

Page: 918 / 943

801

NIKKOR Z 24–70mm f/4 S Lens Manual

Accessories

❚❚

Supplied Accessories

•

LC-72B 72 mm snap-on Front Lens Cap

•

LF-N1 Rear Lens Cap

•

HB-85 Bayonet Hood

•

CL-C1 Lens Case

Using the Lens Case

•

The case is intended to protect the lens from scratches, not from falls or
other physical shocks.

•

The case is not water resistant.

•

The material used in the case may fade, bleed, shrink, or change color
when rubbed or wet.

•

Remove dust with a soft brush.

•

Water and stains can be removed from the surface with a soft, dry cloth.
Do not use alcohol, benzene, thinner, or other volatile chemicals.

•

Do not store in locations exposed to direct sunlight or high
temperatures or humidity.

•

Do not use the case to clean the monitor or lens elements.

•

Be careful that the lens does not fall from the case during transport.

Material

: Polyester

❚❚

Compatible Accessories

72 mm screw-on filters

Filters

Use only one filter at a time. Remove the lens hood before attaching filters
or rotating circular polarizing filters.

Summary of Contents for N1929
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N1929

Reviews:

Related manuals for N1929

Brands by name

Popular brands

Nikon N1929, User Manual

Search results

Summary of Contents for N1929

Reviews:

Related manuals for N1929

Brands by name

Popular brands