manualshive.com logo in svg

Nikon N-STORM, Operation Manual, Page: 40 / 48

Share
Download
Nikon N-STORM Operation Manual Download Page 40

Chapter 3

    The Screens of the N-STORM Software

 

36

 

3.2

 

 

N-STORM Settings Window

 

 
 

 

 

No.

 

Name

 

Description

 

1 [Activation 

Cycle]

 

Specifies the number of activation frames for each cycle. (This 
cannot be specified if continuous mode is used to acquire 
images.) 

2 [Reporter 

Cycle]

 

Specifies the number of imaging frames (frames that capture 
the light emission of the reporter) for each cycle. (This cannot 
be specified if continuous mode is used to acquire images.) 

3 [Continuous 

Mode]

 

Selected when continuous mode is used. 

 

4 [Conjugated 

Fluorescence 

Probe] area

 

Specifies the following: the fluorescent probe to be used, the 
wavelength of the laser to be used, and the display color.

 

5 

[Activation Probe Name]/ 
[Reporter Probe Name]

 

Specifies the names of the activation and reporter fluorescent 
probes for each channel. 

 

6 Laser 

wavelength

 

Selects the excitation wavelength to be used. 

 

7 [Channel 

Color]

 

(channel display color)

 

Specifies the color to be used for display. 

 

 
 

1 

2 

3

4 

5

6

7

Summary of Contents for N-STORM

















































Reviews:

No comments