55
Transferring Images to a Computer (ViewNX-i)
Installing ViewNX-i
ViewNX-i is free software that enables you to transfer images and movies to your
computer for viewing and editing.
To install ViewNX-i, download the latest version of the ViewNX-i installer from the
following website and follow the on-screen instructions to complete installation.
ViewNX-i: http://downloadcenter.nikonimglib.com
For system requirements and other information, see the Nikon website for your region.
1
Prepare a memory card that contains images.
You can use any of the methods below to transfer images from the memory card to a
computer.
•
SD memory card slot/card reader
: Insert the memory card into the card slot of
your computer or the card reader (commercially available) that is connected to the
computer.
•
Direct USB connection
: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the USB cable.
The camera automatically turns on.
B
Notes About Connecting the Camera to a Computer
•
Make sure to turn the camera off before connecting or disconnecting cables. Check
the shape and direction of the plugs and do not insert or remove the plugs at an angle.
•
Make sure that the camera battery is sufficiently charged.
•
For information about the connection methods and subsequent operations, refer to
the documentation included with the computer in addition to this document.
•
Disconnect all other USB-powered devices from the computer. Connecting the
camera and other USB-powered devices to the same computer simultaneously may
cause a camera malfunction or excessive power supply from the computer, which
could damage the camera or memory card.
Installing ViewNX-i
Transferring Images to a Computer
