71
Error Messages
Refer to the table below if an error message is displayed.
Error Messages
Display
Cause/Solution
A
Battery temperature
is elevated. The
camera will turn off.
The camera turns off automatically. Wait until the
camera or battery temperature has cooled before
resuming use.
–
The camera will turn
off to prevent
overheating.
This card cannot be
used.
An error occurred while accessing the memory card.
•
Use an approved memory card.
•
Check that the terminals are clean.
•
Confirm that the memory card is correctly inserted.
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card.
If you need to keep copies of any images, tap
No
and
then save the copies to a computer or other medium.
Tap
Yes
and follow the on-screen instructions to format
the memory card.
Out of memory.
Delete images or insert a new memory card.
Image cannot be
saved.
An error occurred while saving the image.
Insert a new memory card or format the memory card.
The camera has run out of file numbers.
Insert a new memory card or format the memory card.
Cannot record
movie.
A time-out error occurred while saving the movie on
the memory card.
Select a memory card with a faster write speed.
Save previously
recorded data as a
time-lapse movie?
The camera turned off during route shooting or while
recording time-lapse movie.
•
Select
Yes
to create a movie with the recorded data.
•
Select
No
to delete the incomplete data.
–
Memory contains no
images.
Insert a memory card that contains images.