Nikon F2AS PHOTOMIC Page 42 Instruction Manual Download | Manualshive

Page: 42 / 46

background image

42

CHANGING THE FOCUSING SCREEN-continued

Focusing Screen Selector Guide

Type, G:

Clear Fresnel field with extra-bright 12mm~ microprism

focusing spot for viewing and focusing in poor light Four models
(Gl-~;4) are available corresponding to specific focal length lenses
Depth of field cannot be observed.

Type A L

Type A: Matte Fresnel field with 3mm~circular split-
imagerangefinderspotand 12mm~circle. Rapid and accurate focusing.
Excellent for general photography.
Type L: Same asType A screen but with split-image rangefinder line at
a 45

°

angle. Best for subjects with horizontal lines

Type B

: Matte Fresnel field with 12mm~p fineground matte focus-

ing spot in the center. Good for general photography, especially with
long lenses.

Typo C:

Fine-ground matte field with 4mmtclear spot and cross

hair. For photomicrography, astrophotography and other high-mag-
nification applications, and for parallax focusing on aerial images

Type D:

Overall fine-ground matte field. For spocialized close-up

photography and for use with long lenses

Type E:

Matte Fresnel field with Ammo fine ground matte spot

and etched horizontal and verti cal lines. Ideal for architectural
photography.

Type R:

Same as Type A but with rangefinder prisms of sloping sur-

faces at a smaller angle and horizontal and vertical lines to aid proper
comPOsition. Works best with lenses having maximum aperture of from
f/3.5 to f/5.6

Type H:

Clear Fresnel field with microprism focusing pattern over

the entire screen area. Permits rapid focusing on any part of the screen
with optimum edge-to-edge brightness in poor light. Availabje in four
models (Hl-H4) corresponding to part~cular focal length lenses

Typo J:

Matte Fresnel field with central microprism focusing spot

and 1 Emmy circle. Good for general photography.

Type K:

Combination of Type A and J screens. Matte Fresnel field

with 3mm’split-image rangefinder spot surrounded by Imm-wide
microprlsm doughnut. Rapid and accurate focusing for subjects with
both straight lines and ill-defined contours. Suitable for general pho-
tography.

Type M:

Fine ground Fresnel field with S.Smm clear spot and

double cross hair for use in parallax focusing on aerial image, plus
millimeter scales for calculation of individual magnification of ob-
jects or for measuring objects. Brilliant image in dim light. Suit-
able for close-ups, photomicrography and other high-magnifica-
tion applications.

Type P:

Same as Type K but with split-imago rangefinder line at a

45

°

angle amd etched horizontal and vertical lines as an aid to compo-

sition. Rapid and accurate focusing for subject with horizontal or ver-
tical lines or ill-defined contours. Suitable for general photography.

WWW.LENSINC.NET

«
...
40
41
42
43
44
...
»

Summary of Contents for F2AS PHOTOMIC















































Reviews:

No comments

Related manuals for F2AS PHOTOMIC

FE 220 - Digital Camera - Compact

Brand: Olympus Pages: 77

FE 200 - Digital Camera - 6.0 Megapixel

Brand: Olympus Pages: 72

FE 190 - 6MP Digital Camera

Brand: Olympus Pages: 80

FE 190 - 6MP Digital Camera

Brand: Olympus Pages: 80

FE 170 - Digital Camera - 6.0 Megapixel

Brand: Olympus Pages: 77

FE 130 - 5.1MP Digital Camera

Brand: Olympus Pages: 80

Brand: Olympus Pages: 2

Brand: Olympus Pages: 2

Brand: Olympus Pages: 196

E-500 - EVOLT Digital Camera

Brand: Olympus Pages: 128

E-500 - EVOLT Digital Camera

Brand: Olympus Pages: 216

Brand: Olympus Pages: 172

Brand: Olympus Pages: 172

E-410 - EVOLT Digital Camera SLR

Brand: Olympus Pages: 2

Brand: Olympus Pages: 6

Brand: Olympus Pages: 7

CAMEDIA C-500 Zoom

Brand: Olympus Pages: 100

Brand: Olympus Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands