JAA78851-R.3617.A
- L42-13 ･ AF-S 17-55/2.8G -
Additional page
November. 4. 2004
1: Summary
2: Preparation
2-1: The following is used:
* Rear cover ring (JAA78071- Part no. :1K631-287) X 1 pc.
* Bayonet mount (JAA78071- Part no.: 1K404-157) X 1 pc.
* Mount rotation stopper screw (JAA78071- Part no.: 1K120-012) X 1 pc.
3. Procedure
3-1: Put the bayonet mount as shown in Fig. 1.
Put with the groove, in which the lock pin of
camera body enters, just upward.
Fig. 1
3-2: Mount the reversed rear cover ring on the position of Fig. 1, and attach them as shown in Fig. 2.
Put with the groove, in which the lock pin of
camera body enters, just upward.
Large notch of rear cover ring.
Fig. 2
[ How to create positioning tool of 4
th-lens-group holder for lens alignment (AF-S DX ED 17-55/2.8G) ]
It is the same tool with AF-S ED 24-85/3.5-4.5G
1-1: This is a positioning tool of the 4th lens group holder for lens alignment, in order to secure the position for attaching the 4th lens
group temporarily.
INC
