X
Technical Specifications
51
X
Model for 220, 230, 240 V Areas
•
Input voltage:
Select from 220 V, 230 V or 240 V AC by relocating
the fuse holder in the AC inlet.
•
Frequency: 50/60
Hz
•
Voltage fluctuation: ±10
％
•
Rated current:
0.4 A max.
•
Fuse rating:
250 V, 1 A, time-lag low-breaking type, 5x20
miniature fuse x2
•
Power cord:
Use only the following power supply cord. Using the
wrong power cord could result in danger or fire. The
protection Class I equipment should be connected to
PE (protective earth) terminal.
•
Approved according to EU/EN standards, 3
conductor grounding Type H05VV-F, 3 m long
maximum, rated at 250 V AC minimum.
•
Protection Class:
Class I
(8) Operating Environmental Conditions
•
Room Temperature:
0 to 40
°
C
•
Relative Humidity:
85% max., non-condensing
•
Altitude:
2000 m max.
•
Pollution: Degree
2
•
Installation Category
(Overvoltage Category): Category II
•
For indoor use only.
(9) Storage and Transport Environmental Conditions
•
Temperature: -20
to
+60
°
C
•
Humidity:
90%RH max., non-condensing
(10) Conforming Standards
•
The model for 100, 110, and 120 V areas is a UL-listed product.
•
The model for 220, 230 and 240 V areas meets EU IVD Directive (In vitro diagnostic medical
device directive) requirements.
(GM approved: In vitro diagnostic medical device)
•
The model for 220, 230 and 240 V areas meets EU LV Directive (Low voltage directive)
requirements.
•
The model for 220, 230 and 240 V areas meets EU EMC Directive requirements. (EN61326)
(The model for 100, 110, and 120 V areas is not covered by the FCC.)
