manualshive.com logo in svg

Nikon D2X, User Manual

Share
Download
Nikon D2X User Manual Download Page 241

227

Menu Guide—The Setup Menu

Network Settings

Adjust network settings for connection to the 
server.  Press the multi selector up or down to 
highlight an option and then press the multi se-
lector to the right.

Option

Description

Load

settings fi le?

Load 

Wireless

, 

TCP/IP

, and 

FTP 

set-

tings from camera memory card.

Wireless

Adjust settings for connection to wire-
less network.

TCP/IP

Adjust TCP/IP settings, including IP ad-
dress, DNS, and gateway settings.

FTP

Enter password and user ID and adjust 
settings for connection to ftp server

 Firmware Version

To  display the current camera fi rmware  version, 
highlight 

Firmware Version 

in the setup menu 

(

 209) and press the multi selector to the right.  

Press the multi selector to the left to return to the 
setup menu.

Summary of Contents for D2X
























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands