Nikon D2X User Manual Download Page 175

Page: 175 / 279

161

Menu Guide—The Playback Menu

Print Set

Print set

is used to create a digital “print order” that lists the photographs

to be printed, the number of copies, and the information to be included on
each print. This information is stored on the memory card in

igital

rint

rder

ormat (DPOF). The card can then be removed from the camera and

used to print the selected images printed on any DPOF-compatible device.

Highlight

Print set

in the playback menu (

154)

and press the multi selector to the right. Press the
multi selector up or down to highlight an option,
then press to the right to make a selection.

Option

Description

Select / set

Select photographs for printing.

Deselect all?

Remove all images from print order.

Print Set

Print set

will not be available if there is not enough space on the memory card to

record the print order. Delete unwanted pictures and try again.

NEF Images

Images created at image quality settings of

NEF (Raw)

(

45) can not be selected for

printing using this option.

Taking Pictures for Direct Printing

When taking images to be printed without modifi cation, set the

Color space

op tion

in the shooting menu to

sRGB

(

69).

DPOF / PictBridge

igital

rint

rder

ormat (DPOF) is an industry-wide standard that allows pictures to

be printed from print orders stored on the memory card. Before printing, check that
the printer or print service supports DPOF. Pictures selected using

Print set

can also be

printed on PictBridge printers via direct USB connection (

234). When a PictBridge

printer is connected to the camera using the supplied UC-E4 USB cable, a menu will be
displayed in the camera monitor; select

Print (DPOF)

to print the current print order.

Note that the date and shooting information will not be printed.

Summary of Contents for D2X
























































































































































































































































































Search results

Summary of Contents for D2X

Reviews:

Brands by name

Popular brands

Nikon D2X, User Manual

Search results

Summary of Contents for D2X

Reviews:

Brands by name

Popular brands