Nikon D2X User Manual Download Page 215

Page: 215 / 279

201

Menu Guide—Custom Settings

Custom Setting e6:

Auto Bracketing in M Exposure Mode

This option controls what settings are affected
when

AE & fl ash

AE only

is selected for

Custom Setting e5 in manual exposure mode.

Highlight

e6 Manual mode bkting

in the sec-

ond level of the CSM menu (

178) and press the

multi selector to the right. Press the multi selector
up or down to highlight an option, then press to
the right to make a selection.

Option

Description

Flash/speed/

aperture

Flash/speed

(default)

Camera varies shutter speed (Custom Setting e5 set to

AE only

) or

shutter speed and fl ash level (Custom Setting e5 set to

AE & fl ash

Camera varies shutter speed and aperture (Custom Setting e5 set to

AE only

) or shutter speed, aperture, and fl ash level (Custom Setting

e5 set to

AE & fl ash

Flash only

Flash/

aperture

Camera varies aperture (Custom Setting e5 set to

AE only

) or aper-

ture and fl ash level (Custom Setting e5 set to

AE & fl ash

Camera varies fl ash level only (Custom Setting e5 set to

AE & fl ash

• If no fl ash is attached when Custom Setting b1 (

ISO auto

) is on, camera will vary

sensitivity only, regardless of setting selected.

• Flash bracketing performed only with i-TTL, D-TTL, or AA fl ash control.

Custom Setting e7:

Auto Bracketing Order

This option controls the order in which bracketing
is performed. Highlight

e7 Auto BKT Order

the second level of the CSM menu (

178) and

press the multi selector to the right. Press the
multi selector up or down to highlight an option,
then press to the right to make a selection.

Option

Description

Under>MTR>Over

Bracketing proceeds in order from lowest to highest value.

MTR>Under>Over

(default)

Bracketing performed in order described in “Bracketing” (

98).

Summary of Contents for D2X
























































































































































































































































































Search results

Summary of Contents for D2X

Reviews:

Brands by name

Popular brands

Nikon D2X, User Manual

Search results

Summary of Contents for D2X

Reviews:

Brands by name

Popular brands