manualshive.com logo in svg

Nikon D2X, User Manual

Share
Download
Nikon D2X User Manual Download Page 207

193

Menu Guide—Custom Settings

Custom Setting c3: 

Auto Meter-off Delay

This option controls how long the camera con-
tinues to meter exposure when no operations are 
performed: 4 s, 6 s (the default option), 8 s, or 16 s 
or until the camera is turned off (

No limit

).  High-

light 

c3 Auto meter-off 

in the second level of the 

CSM menu (

 177) and press the multi selector 

to the right.  Press the multi selector up or down to highlight an option, then 
press to the right to make a selection.  Choose a shorter meter-off delay for 
longer battery life.

Custom Setting c4: 

Self-Timer Delay

This option controls the length of the shutter-
release delay in self-timer mode.  Shutter-release 
can be delayed by approximately 2 s, 5 s, 10 s (the 
default option), or 20 s.  Highlight 

c4 Self-timer 

in the second level of the CSM menu (

 177) and 

press the multi selector to the right.  Press the 
multi selector up or down to highlight an option, 
then press to the right to make a selection.

Custom Setting c5: 

Monitor off Delay

This option controls how long the monitor remains 
on when no operations are performed: 10 s, 20 s 
(the default option), 1 minute, 5 minutes, or 10 
minutes.  Highlight 

c5 Monitor off 

in the second 

level of the CSM menu (

  177) and press the 

multi selector to the right.  Press the multi selector 
up or down to highlight an option, then press to the right to make a selec-
tion.  Choose a shorter monitor-off delay for longer battery life.

 The EH- 6 AC Adapter

When the camera is powered by an optional EH-6 AC adapter, exposure meters will 
not turn off and the monitor will only power off after ten minutes, regardless of the 
options chosen for Custom Settings c3 (

Auto meter-off

) and c5 (

Monitor off

).

Summary of Contents for D2X
























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands